Hydraulic Compression Moulding Press
300 x 300 mm Single Station Hydraulic Compression Moulding Machine, 70 Tons
|Platen Size||300 x 300 mm|
|Daylight Gap||300 mm|
|Machine Type||Closed Frame|
|No. of Station||Single|
|Heating of Platens||Electrical Heater|
|Stroke Length||275 mm|
|Bore Diameter||200 mm|
|Motor Power||3 HP|
|Country of Origin||Made in India|
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
- High performance
- Easy operation
- Low maintenance cost
- Moulding purposes of rubber fiber
- Urea melamine